Meguiar's Ultimate Snow Foam Car Cleaning Foam

• Ideal for DIYers using a pressure washer with a foam cannon.
• Unique pH-neutral formula.
• Does not strip wax.
• The ultimate solution for a safe, swirl-free wash.
• Xtreme Cling Foam with unbeatable surface-clinging duration for optimal performance.
• Amazing foam that "clings" to the paint, gradually softening dirt and grime.
• Use either as a pre-wash or as a primary wash.
• Ideal for soft clear coats – the foam creates a lubricating film between the wash mitt and the paint, minimizing the risk of damage to soft clear coats.
• Suitable for clear-coated, waxed, and coated finishes.
• Recommended dilution 5:1

DIRECTIONS:

• The car should be cool to the touch and in the shade.
• Mix 1 part Meguiar's® Ultimate Snow Foam with 5 parts water in the foam cannon reservoir (e.g., 100ml of shampoo to 500ml of water).
• Pre-rinse your vehicle with clean water to remove loose dirt.
• Apply Ultimate Snow Foam to the entire vehicle starting from the bottom and allow it to "dwell" on the surface until the foam just begins to break down. Do not allow the product to dry or freeze on the surface.
• For lightly soiled vehicles, simply rinse off with a pressure washer. For dirtier vehicles, a Meguiar’s wash mitt may be required, followed by a pressure washer rinse.
• Rinse with a pressure washer before the regular wash with a mitt.
• Dry the vehicle with Meguiar's Supreme Drying Towel (X1905EU) or Meguiar’s Water Magnet (X2000EU) to avoid water spots and mineral deposits.
• Follow up with your favorite Meguiar's wax for protection and shine.
• If the Meguiar's Ultimate Snow Foam does not "cling" to the surface and slides off, it is a clear indication that it is time to wax your car.
• Store the product at temperatures above 7°C. Do not let it freeze. However, if this happens, allow the product to gradually return to room temperature without heating it before use.