Meguiar's 2-Step Headlight Restoration Kit G2970EU

2-step restoration and protection kit for headlights.

Restore & protect your headlights in 2 simple steps!

• Easily restores clarity to oxidized, yellowed, and weathered headlights.
• Revitalizes the appearance of dull headlights and significantly improves nighttime visibility and safety.
• The cleaning pads can be used by hand or, for faster results, with the DA Power System, G3500.

The kit includes:

- Cleaning compound, 4oz/115ml (Step 1).

- Coating/protection spray, 4oz/113g (Step 2).

- 2 x 7.7 cm diameter pads for applying the cleaning compound.

INSTRUCTIONS

• Apply to a clean, cool surface in the shade.
• As a precaution, mask off the area around the headlight with masking tape before application.
• SHAKE WELL before use.
• Step 1: Apply a small amount of the cleaning compound (about the size of a small coin) onto an abrasive pad.
• Using back-and-forth horizontal motions, thoroughly clean the entire surface of the headlight.
• Wipe with a damp cloth and dry completely before proceeding to step 2.
• The surface is properly cleaned when it shows a uniform "frosted" appearance across the entire headlight. Repeat if necessary.
• Step 2: Shake the protection spray well before use.
• Spray the entire surface of the headlight using horizontal motions. Avoid over-application. You will immediately see the clarity return.
• Wait 3-5 minutes and repeat with the spray for a second coat to fully seal the headlight. The protective material will be dry to the touch in 3-5 minutes and will fully cure within 24 hours.
• Avoid spraying in windy conditions. Immediately remove any overspray.