Meguiar's Mirror Glaze® Ultra-Cut Compound M10508

• Very High cut level: 12/12
• Fast defect removal & hologram minimization.
• Exclusive micro-abrasive technology for a best-in-class finish.
• Very fast removal of P1200 grit sanding marks and finer.
• Amazing for removing scratches, defects, acid rain, and heavy swirl marks/holograms.
• Ideal for B-pillar polishing.
• Safe for use on all paint finishes, including scratch-resistant clear coats.
• BSS - Body Shop Safe.
• APPLICATION METHOD: Hand, DA dual action polisher, or rotary polisher.

DIRECTIONS

• SHAKE WELL. Apply to a clean, cool surface once the car paint has properly cured. Work in sections.
• Hand Application: Excellent for B-pillar polishing and spot repair. Simply apply the product to a soft cloth (X2010EU) and rub the desired area. Wipe away residue with the clean side of the cloth.
• With DA Dual Action Polisher: Apply compound directly to the cutting pad (DFC5). Set polisher to speed 4-5 (for MT310 at 4,800-5,800 opm’s). Apply moderate pressure for the first 2-3 passes and then light pressure for the next 2 passes. Wipe off residue immediately after each panel.
• With Rotary Polisher: Set polisher to approximately 1200-1800 RPMs and use a wool pad (WRWC8). To prime new or old pads, mist with M34 Final Inspection. Apply compound directly to the paint and work in 5x5 cm sections with overlapping passes. Continue until defects or sanding marks are removed. Wipe off residue with a microfiber cloth (X2010EU or E101) before proceeding with polishing.
  For best results on OEM factory paints, use a lower speed of 1200-1500 RPMs and less pressure. For less aggressive cutting, use a cutting pad (WRFC7).
• For final polishing, use M20508 Ultra Finishing Polish with the corresponding pad.
• For optimal results, wash pads regularly.